Upload a configuration to AirLink OS routers that are already reporting to the AMM.

To maintain consistency across your fleet, you can deploy a “golden” configuration that defines the standard settings for all gateways. This process ensures every device starts from a trusted baseline, minimizing errors and simplifying updates.

Note: the “golden” configuration must match the hardware and software versions deployed in the fleet. If multiple hardware types or software versions are in use, a separate golden configuration is required for each combination.

The general process to upload a “golden” configuration to a fleet is as follows:

1. Using the AirLink OS UI, configure and test a local AirLink OS router.
2. When satisfied with the setup, export the golden configuration as a JSON file.
3. Login to the AMM and select the AirLink OS router that matches the required software and hardware.
4. Go to Configuration > Deployment > Upload for AirLinkOS
5. Specify the JSON file and upload it.
6. You will be automatically taken to Configuration > Deployment > Configuration Control. For more information on this feature, refer to Upload for AirLinkOS
7. The Status will show as Pending and will transition to Confirmed when AirLink OS router checks in and uploads and applies the new configuration.
8. If the status is not Confirmed, then verify the versions of software and hardware and if any manual changes were done to the JSON file.
9. Field test the AirLink OS router.
10. When satisfied with the field test, repeat from step 3.

It is highly recommended that a fleet is configured in stages, that allow sufficient time between stages to field test the configuration.